Welcome to Vatac !
Language
Site Map
Gate Valve

China gate valve manufacturers, gate valve suppliers, gate valve factory. Vatac standard Steel Gate Valves are designed and manufactured to ensure leakage of less than 100 ppm (parts per million) of volatile organic compounds. Extensive base line laboratory testing (static and cycle testing) has been performed establishing critical design parameters necessary to achieve low emission sealing in the Vatac stem packing seal area and in the bonnet gasket sealing area, In-house testing procedure has been developed and is periodically performed to ensure that standard product design and manufacturing criteria consistently result in the Vatac Gate Valve meeting a maximum of 100 ppm VOC leakage prior to shipment.

 

Vatac O-Ring Seal Block and Bleed Gate Valves are recommended for hard to hold services such as butane, kerosene, gasoline, propane, diesel oils, fuel oils, jet fuels, steam, air, natural gas, toluene, hydrogen, helium, and oxygen. Manifold tank farms, LPG areas, and airport fueling facilities provide excellent opportunities for savings with the O-Ring Seal Gate Valves. For effective double block and bleed service, the line media should be free of foreign matter and solids in suspension.

Please feel free to contact with us at sales@cnvchina.com or filling up an enquiry form instructed at the bottom, You will get an effective response within 24 hours from Vatac sales representative.
Thanks for your valued time with interest!

Vatac Cast Gate Valves are designed and manufactured strictly to International Standards API 600, ASME B16.34 or DIN3202, Featured with compact structure & Low emission service.

STANDARDS COMPLIANCE:
» Design & Manufactured to API 600, ASME B16.34 or DIN3202
» P.T Ratings to ASME B16.34
» Face to Face dimensions to ASME B16.10
» Flanged Ends to ASME B16.5, ASME B16.47
» Butt-weld Ends to ASME B16.25
» Valves Marking to MSS SP-25
» Inspect & Tested to API 598

CAPABILITIES:
» Sizes Ranges from 1 1/2” thru 60”
» Pressure Ratings from Class 150 to Class 1500, PN16 to PN260
» Structured in Bolted Cover, Outside Screw and York, Optional Non-rising Stem
» Ends Connections in Flanged R.F or RTJ, Butt-welded and Grooved
» Body Materials available in Carbon Steel A216 WCB, WCC, Low Carbon Steel LCB, LCC, Alloy Steel A217 WC6, WC9, Stainless Steel A351 CF3, CF8, CF3M, CF8M, Duplex & Super Duplex Steel A890 GR. 4A, GR. 5A, Special Materials in Monel, Alu. Bronze C95800, 95600 etc.
» Trim Materials available in 13%Cr, F11, F22, SS304, SS304L, SS316, SS316L and other specials
» Actuations can be equipped with Handwheel, Gear Devices, Electric / Pneumatic or Hydraulic Actuators
» Optional Bypass system, Live Loading Packing & O-ring Seal available upon request.

Cast Gate Valves from Vatac is not only limited to those standard design, but also those special items with Bonnet / Stem Extension to meet Cryogenic Service Conditons, please feel free to contact with Vatac Sales team or your local Representatives for other optional special requirements.

* Subject:  
* Message:  
* Contact person:  
*  Email:  
  (Enter the correct contact information, to ensure that we can contact you.)
Company Name:  
*  Phone:  
  (Enter the correct contact information, to ensure that we can contact you.)
Fax:  
Address: